DINSEN Spring Clamp – Precision Sealing Solution Compliant with DIN3021

The DINSEN Kẹp lò xo is a self-tensioning kẹp ống engineered in strict accordance with DIN3021 standards, delivering reliable, leak-proof connections for hose-to-spigot systems across a wide range of industrial and automotive applications.

Manufactured from high-grade tempered spring steel, this spring band clamp continuously adapts to hose diameter fluctuations caused by thermal expansion or material aging—ensuring consistent clamping force without the need for re-tightening.

Nhận báo giá ngay hôm nay!

LIÊN HỆ NGAY tải xuống pdf

Chia sẻ

Chi tiết

Key Specifications

Standard: DIN 3021 (Part 1: Dimensions & Materials; Part 2: Technical Delivery Conditions)

Material: Spring steel (e.g., 51CrV4, C75S)

Band Width: 12mm/15mm

Temperature Range: -40°C to +200°C

Xử lý bề mặt: Lớp phủ vảy kẽm không chứa crom(VI); khả năng chống ăn mòn lên đến 720 giờ phun muối.

Forms: Type A / Type B

Constant Clamping Force

The DINSEN kẹp lò xo employs a precision-engineered spring band design that maintains near-constant radial force across the entire service life. This ensures: Leak-free sealing under thermal cycling and pressure fluctuations; No relaxation or loss of tension over time

Elimination of manual re-torquing after installation

Robust Material Performance

High-tensile alloy spring steel with exceptional resistance to brittle fracture, even at low temperatures
Optional surface protection: galvanized, black oxide, or passivated—meeting automotive ELV directives

Application Versatility

The DIN3021 kẹp ống is suitable for:

Automotive systems: fuel lines, coolant circuits, charge air ducts, power steering, air intake, heating/cooling
Industrial machinery: engine manufacturing, agricultural equipment, white goods
Fluid handling: water/brine outlet lines, air ducts, fuel vent systems

Quality Assurance – Comprehensive Inspection Protocol

Every DINSEN kẹp lò xo batch undergoes a rigorous multi-stage inspection process aligned with DIN3021 technical delivery conditions :

1. 100% Visual Inspection

Burr height ≤0.02mm; no sharp edges, cracks, rust, or plating defects

2. Dimensional Accuracy

Core inner diameter tolerance: ±0.05mm
Full geometric verification: circularity, parallelism, fillet radius

3. Surface Treatment Validation

Coating thickness: galvanized ≥8μm; passivation ≥3μm
Cross-cut adhesion test; salt spray resistance

4. Mechanical Performance Testing

Hardness: 65Mn HV420-480 / 304SS HV380-450
Clamping force per DIN3021-2 test requirements
50-cycle resilience test: rebound deviation ≤2%
Long-term endurance and tightness verification

5. Simulated Assembly & Functional Tests

Pressure-holding tightness (hydraulic/pneumatic)
Torque resistance for double-ear clamps
Fatigue life: 1000+ cycles (standard); 5000+ cycles (automotive grade)

Why Choose DINSEN Spring Clamps?

✔ DIN3021 Compliant – Fully meets German and international hose clamp standards
✔ Self-Adjusting Design – Maintains sealing integrity under temperature extremes (-40°C to +200°C)
✔ No Maintenance Required – Permanent clamping force eliminates re-tightening
✔ Environmentally Responsible – Chromium(VI)-free coatings comply with end-of-life vehicle directives
✔ Proven in Automotive & Industrial Applications – Trusted by leading manufacturers worldwide