Carane Ngresiki lan Njaga Stainless Steel Sambungake Clamp Kanggo Ngindhari Noda Banyu lan Sidik Jari?

How to clean and maintain stainless steel connect clamp to avoid water stains and fingerprints?

Use an all-purpose cleaner, glass water or detergent with a wet towel to clean the water marks, dust, oil, etc. on the surface of stainless steel, and then wipe the water with a clean, non-linting towel. The mirror-finished stainless steel surface does not need to be oiled, but the matte stainless steel needs to be oiled. When oiling, put the stainless steel oil in a small spray pot, spray it on the towel or stainless steel surface, and apply it evenly.

Daily maintenance. The mirror-finished stainless steel surface can be regularly wiped off with glass water or other detergents or a wet towel to remove fingerprints, watermarks, ash stains, etc., and then wiped with a non-linting cloth; after the matte stainless steel is oiled, if there are fingerprints or dust, use a clean cloth containing a small amount of stainless steel oil to wipe it until it is bright.

2. S Store in a dry and ventilated place, avoid humid environment, which can prevent stainless steel from rusting. Avoid contact with acid and alkali substances. Avoid contact with acid and alkali substances to prevent corrosion of the surface. Avoid heavy pressure and bumps. Avoid heavy pressure and bumps to prevent deformation and damage. Regular cleaning. Always keep it clean, clean up oil and dirt in time, and avoid rust caused by long-term residue. Use the right detergent. Avoid using detergents containing acid or alkali, and use neutral detergent or soapy water. Regular maintenance. Apply stainless steel maintenance agent regularly to form a protective film to increase wear and corrosion resistance.

3. Deal with rust. If you encounter rust, gently wipe it with a wire brush or sandpaper, then clean it with detergent or soapy water, and apply rust inhibitor or maintenance agent. By following these methods, you can extend the service life of stainless steel products and maintain their beauty.

DEN also has arrangements in this regard. Before packaging, DINSEN's stainless steel products have dedicated workers to apply maintenance oil to the products to ensure that the products are clean and beautiful. After being dried in the sun, the products are put into packaging again and packed into boxes for transportation.